Construction Company in Greater Noida — 200+ Projects Delivered Since 2017
Greater Noida's leading construction company since 2017. ISI-certified materials, M20/M25 RCC + Fe500D steel, 8-year structural warranty, real-time Trackovo updates and a 95% first-pass GNIDA map approval rate — under one accountable contract.
Built differently. Built to last.
Six things that separate Aarna from the cheapest local contractor — and why our clients still pick us over them.
Real-time Trackovo updates
Daily photos, material logs, milestone status and PM chat — directly on your phone. No "send me an update bhai" calls.
Founder is a civil engineer
Prashant Chaudhary — ex-Delhi Metro infrastructure engineer. Engineering-grade decisions on every load calculation, not "thumb-rule" sizing.
ISI-certified materials only
UltraTech / ACC cement, TATA / JSW Fe500D steel, Jaquar / Hindware fittings, Havells wiring. Cube tests on every concrete pour, logs available.
10 milestone payments — no advances
Pay only against verified site stages — foundation, ground RCC, first RCC, plaster, etc. No upfront. No "advance for material" trap.
100% in-house team
Site engineer, supervisor, foreman, mason, electrician, plumber, painter — all on Aarna payroll. No vendor-blame games, single accountability.
Written 8-year warranty
Foundation, columns, beams, slabs, load-bearing walls covered. Plus 2-year non-structural. Warranty book signed at handover.
Basic · Standard · Premium · Luxury
Same engineering across all tiers — the structure (RCC, steel, cement) is built to identical IS-codes. What changes are finishes, fittings and brand grade.
Basic
Standard
Premium
Luxury
RCC & structural specs we build to
Every Aarna build is engineered to IS-codes — the same standards used on Delhi Metro infrastructure. Cube tests on every pour. Logs available.
Plain & Reinforced Concrete
M20 minimum for residential columns / beams / slabs. M25 standard. Compressive strength verified by 28-day cube tests, logs maintained.
Steel Reinforcement
Fe500D TFR-rebar from TATA / JSW. Yield strength > 500 MPa, elongation > 16%. Spec sheet attached with every consignment.
Earthquake-Resistant Design
Designed for Zone IV (Delhi NCR seismic zone). Ductile detailing per IS 13920. Survives design-basis earthquake without structural collapse.
Wind & Live Loads
Code-compliant load calculations for wind (basic wind speed 47 m/s for NCR), live loads (2 kN/m² residential), and dead loads. No "thumb-rule" sizing.
Foundations & Piles
Soil bearing test before foundation design. Raft, isolated or combined footings sized per actual SBC, not generic assumptions.
National Building Code
Full compliance: fire safety, lighting, ventilation, accessibility, parking, setbacks per GNIDA / YEIDA / Noida Authority bylaws.
Acceptance
Map approval & legal handled end-to-end
GNIDA, YEIDA and Noida Authority approvals — drawings, structural calculations, online submission, query response, sanction. We've passed 95% of submissions on first attempt. Included in our standard package.
From plot to handover keys — 8 stages.
Predictable, milestone-billed, fully visible. Average timeline 9-11 months for a 1500 sq ft 3BHK (Standard tier).
Site visit & brief
Free site inspection, soil-test recommendation, requirement capture, tier suggestion.
Quote, BOQ & contract
Itemised BOQ, tier-locked rate, payment schedule, contract signed.
Drawings + map approval
Architectural plans, structural drawings, GNIDA / YEIDA submission and sanction.
Foundation & RCC frame
Excavation, footings, columns, ground & first RCC slab. Cube tests on every pour.
Brickwork & plaster
AAC block masonry, internal & external plaster, waterproofing of roof & toilets.
MEP & tiling
Electrical conduits, plumbing lines, vitrified flooring, kitchen / bath tile work.
Finishes & fittings
Doors, windows, modular kitchen, sanitary fittings, painting, false ceiling.
Snagging & handover
Joint walkthrough, defect list closure, completion certificate, warranty book signed.
10 milestones — tied to verified site stages.
Pay only after each milestone is signed off by you. No upfront, no advance, no surprises.
Aarna stands behind every RCC pour.
A signed warranty book at handover. Not "verbal assurance" — written, dated, enforceable.
Structural warranty
Foundation, columns, beams, slabs, load-bearing walls. Cracks, settlement, structural defects.
Waterproofing
Roof, toilets, balconies — chemical waterproofing with manufacturer guarantee passed on to you.
Non-structural
Plaster cracks (non-settlement), tile pop-up, paint adhesion, plumbing leaks at joints.
Modular kitchen carcass
BWP-grade ply / marine board carcass against delamination, swelling, infestation.
Hardware & fittings
Hettich / Hafele drawer channels, hinges, locks. Jaquar / Kohler bath fittings on brand warranty.
Cube test logs
Every concrete pour's 28-day strength test result archived. Available on request, anytime.
Completed projects in Greater Noida.
A sample of 200+ delivered builds — sectors, sqft, and tier are real. Full portfolio in projects gallery.
Prashant
Chaudhary
Former DMRC civil engineer — 10+ years on metro projects.
"I came from Delhi Metro infrastructure. The kind of rigour that goes into a metro line — cube tests, load calculations, milestone QC — should also go into a 2BHK home. That's the gap Aarna fills."
Before founding Aarna in 2017, Prashant spent a decade as a civil engineer on Delhi Metro Rail Corporation infrastructure — viaducts, station boxes, depot structures. The discipline of milestone-based quality control, cube testing every concrete pour, and IS-code structural design is now baked into every Aarna build, residential or commercial.
Every Aarna site has a full-time site engineer reporting to Prashant. Every concrete pour is cube-tested. Every steel consignment carries TFR-rebar certificates. Every milestone is photographed, logged in Trackovo and signed off by the client before the next payment is due.
Voices from delivered builds.
Selected client feedback from completed projects across Greater Noida sectors.
"What sold us was the milestone-based payment. No upfront advance, no 'cash deal' — every rupee was tied to a stage we could see on Trackovo. The 9-month timeline was beaten by a week."
"The cube-test logs were the giveaway. No other contractor we spoke to even mentioned cube tests, let alone shared the reports. Engineering rigour that you don't get from a typical local builder."
"GNIDA approval came through on the first submission — most contractors take 2-3 attempts. Saved us 6 weeks. The written 8-year warranty is the kind of thing only Aarna offered."
Sectors & areas we build in.
Frequently asked questions
12 of the most common questions we hear from homeowners planning construction in Greater Noida.
Ready to break ground?
Free site visit. Quotation in 24 hours. No advance. Engineering-grade construction from ₹1,650/sq ft.
Our Construction & Fit-Out Work
On-site photos from our construction and interior projects — structure, staircases, electrical, tiling, paneling and commercial fit-out work by the Aarna team.
Frequently Asked Questions
Residential construction typically costs between Rs 1,600 and Rs 2,500 per sq ft. A 1,500 sq ft plot with G+2 construction falls in the Rs 35-55 lakh range including structure and basic finishing.
Structure (foundation, RCC, walls), basic electrical and plumbing, plastering, and waterproofing. Does not include boundary wall, interior design, modular kitchen, or government fees. These extras add 15-25%.
All Greater Noida sectors: Alpha, Beta, Gamma, Delta, Sigma, Zeta, Omicron, Knowledge Park 1-3, Surajpur, Kasna, Dadri, Pi 3-4, Ansal Golf Link. Also Noida Extension and Yamuna Expressway.
Yes, including YEIDA-allotted plots in Sectors 17, 18, 20, 22D. We manage the entire approval process along with construction execution.
Map approval from GNIDA, structural stability certificate, and fire clearance for G+2+. Takes 30-60 days. We handle all paperwork as part of our turnkey service.
Our Trackovo app provides real-time visibility: task schedules, material status, site photos, quality checklists, and payment milestones from your phone.
ISI-certified: Ultratech/ACC cement, TATA Tiscon TMT steel, Astral/Supreme CPVC plumbing, Finolex/Havells wiring. You can choose brands from 2-3 options per category.
Use our online Cost Calculator or book a free site visit. Our engineer prepares a detailed BOQ within 3-5 working days. Call 9582581238 or WhatsApp.
Construction cost ranges from approximately Rs. 1,650 to Rs. 2,400 per sq ft depending on materials and finishes.
A typical 1,500-2,000 sq ft house takes 8-12 months from foundation to handover.
Yes, we handle the complete GNIDA and YEIDA map approval process including architectural drawings and authority submission.