uPVC and aluminium windows in a living room of a Greater Noida apartment

uPVC vs Aluminium Windows – Which Should You Pick and What Do They Cost?

We fit windows almost every week in Greater Noida, Noida Extension and along the Yamuna Expressway. And almost every customer asks the same question: uPVC or aluminium? The honest answer is that both are good. They just suit different rooms, different budgets and different roads. Let me break it down the way we explain it on site.

The short answer first

If your house or flat faces a main road or a highway, uPVC blocks noise better. If your budget is tight, or the window is small, aluminium costs less and lasts fine. Many of our customers mix both. uPVC in bedrooms facing the road. Aluminium in the kitchen, bathroom and rear side. That mix saves money where noise does not matter.

Price comparison in 2026

Aluminium windows are cheaper per sq ft. uPVC costs more upfront but gives better insulation. On our work, a window in a washroom renovation is charged at Rs 700 per sq ft for the making and fixing. That is our labour-side rate, not the frame price. The frame and glass you buy depends on the brand and section you choose.

A rough market picture in 2026, so you can compare apples to apples:

Window typeTypical market price range (per sq ft)What affects it
Basic aluminium slidingLowest of the twoSection thickness, glass type, powder coating
Aluminium with better section and double glassMid rangeThicker profile, powder-coated finish
uPVC casement or slidingHigher than aluminiumProfile brand, multi-point locks, double glazing

I am not putting exact market figures here because frame prices change with brand and section. What I can confirm is our own window work rate: Rs 700 per sq ft. If you are building a full house, our grey structure starts at Rs 1,100 per sq ft, and turnkey with material starts at Rs 1,650 per sq ft on the 2026 price list. GST is extra on everything.

For your own house, use our free home construction cost calculator. It gives an item-by-item estimate. The final quotation always comes after a site visit.

Sound insulation for noisy roads

This is where uPVC clearly wins. uPVC frames are thick and hollow in the right way. They trap air. Combined with double glass, they cut a lot of road noise.

Aluminium is metal. Metal carries sound. A single-glass aluminium sliding window on a busy road will let in every horn and every truck. If your bedroom faces a sector road, the Swarn Jayanti Park side, or the Yamuna Expressway service lane, this matters a lot.

Our simple advice: bedrooms facing traffic get uPVC. Windows opening into your own courtyard or a quiet lane can be aluminium. You will hear the difference at night.

Heat insulation and electricity bills

uPVC does not conduct heat. Aluminium does. In May and June, touch an aluminium frame in the afternoon sun. It will be hot. That heat slowly comes into the room.

What does this mean in practice?

  • Rooms with uPVC windows stay cooler in summer.
  • Your AC does not run as hard, so bills are a bit lower.
  • West-facing rooms benefit the most from uPVC.
  • Aluminium with a thermal break helps, but that grade costs close to uPVC anyway.

So the money you save on an aluminium window, you may partly pay back through the AC in summer. Not a huge amount. But over ten years, it adds up.

Durability, rusting and colour fading

Both materials last long if fitted properly. Here is the honest picture.

Aluminium

Aluminium does not rust. It can corrode near the coast, but in Greater Noida’s climate that is not a real concern. The weak point is the finish. A cheap painted section can fade or chalk after a few summers. Powder-coated sections hold colour much better. Spend the little extra on powder coating. It is worth it.

uPVC

uPVC does not rust, does not rot and does not need paint. The finish can fade slightly over many years of direct sun. Quality profiles fade less. The real risk with uPVC is a thin, cheap profile. It can warp in strong summer heat or go yellow. A good profile section will not do this. So if you buy uPVC, do not buy the thinnest section in the market.

Fitting matters more than the material. A badly fitted uPVC window leaks in monsoon just like a badly fitted aluminium one. We check the frame, the sill level and the sealant line before we hand over any window work.

Maintenance side by side

TaskAluminiumuPVC
CleaningWipe with a wet clothWipe with a wet cloth
Repainting neededNot if powder coatedNever
Track cleaningSliding tracks collect dust, vacuum themCasement tracks stay cleaner
RustingNone, though fittings may need oilNone
Colour fadingDepends on coating qualitySlight, on cheap profiles

Neither material asks for much. Both are easier than an old wooden window that needs polish every few years.

Best use room by room

Bedrooms

uPVC if the room faces a road. Double glass if you can stretch. Sleep is worth it.

Kitchen

Aluminium is fine here. The kitchen is usually at the back, away from traffic. Also, cooking heat and oil vapour do not bother powder-coated aluminium at all.

Bathrooms and washrooms

Aluminium sliding windows are the standard choice. They are cheap, small and easy to clean. If you are doing a full washroom renovation, our washroom window work is Rs 700 per sq ft. You can estimate your full washroom job with our free washroom renovation cost calculator. It lists every item, from waterproofing at Rs 70 per sq ft to the exhaust fan.

High-rise flats and balconies

For large sliding panels on a balcony, aluminium is usually better. It is stronger for big spans. uPVC frames can sag over very wide openings unless the profile is reinforced. For a balcony in Noida Extension facing a park, a powder-coated aluminium slider with clear glass looks clean and stays within budget.

Front elevation

This is a design call. Aluminium gives slim lines and a modern look. uPVC gives a softer, bulkier frame. Many of our customers pick aluminium for the front elevation looks and uPVC inside for quiet bedrooms. Both work.

Checklist before you order either one

  • Decide which rooms actually face noise. Only those need uPVC.
  • Check the section thickness, not just the price per sq ft.
  • Ask for powder coating on aluminium.
  • Ask if the uPVC profile has internal steel reinforcement.
  • Choose double glass for road-facing bedrooms.
  • Check the locking system before you pay the advance.
  • Confirm who does the sill, fixing and sealant work.
  • Get the making and fitting rate in writing.

Verdict by budget and location

Tight budget

Go aluminium with powder coating, all through the house. It is the cheaper option and it will not let you down. Put the savings into waterproofing or plumbing instead. Those matter more than frame material.

Moderate budget, noisy location

Mix. uPVC in road-facing bedrooms. Aluminium everywhere else. This is the most common combination we install.

Comfort first, budget flexible

uPVC with double glazing for bedrooms and living areas. Aluminium only for the kitchen, washrooms and balcony sliders.

Village plots and Jewar side

In Jewar and along the Yamuna Expressway, dust is as big a problem as noise. uPVC casement windows seal tighter against dust than sliding windows of either material. If your plot faces the expressway, lean towards uPVC casements.

One last thing about fitting

The best frame fitted badly gives you leaks, rattles and gaps. The frame must sit level. The anchor fixing must be correct. The sealant line outside must be continuous. If you are renovating in Greater Noida, we do window work as part of home renovation and also as a standalone job. Our owner, Prashant Chaudhary, is a civil engineer with 10+ years on Delhi Metro projects, so the site checking is done with an engineer’s eye, not a salesman’s.

Window cost is one part of a bigger picture. If you are building a house from scratch, run your full job through the construction cost calculator first. Then talk to us about which windows go where.

If you are still unsure between uPVC and aluminium for your own home, call or WhatsApp us at +91 95825 81238. Tell us which road you face and which rooms bother you. We will give you a straight answer.

Frequently Asked Questions

Which is cheaper, uPVC or aluminium windows?+

Aluminium is cheaper per sq ft. uPVC costs more upfront but insulates better against noise and heat, so it can pay back through comfort and lower AC use. Our window making and fixing rate is Rs 700 per sq ft. Frame prices depend on the section and brand you choose.

Which window is better for a bedroom facing a main road?+

uPVC with double glass. uPVC blocks sound much better than aluminium, and double glazing reduces road noise further. If your bedroom faces a busy road in Noida or the Yamuna Expressway, this combination makes a clear difference at night.

Does aluminium rust in Indian weather?+

No, aluminium does not rust. The fittings may need a drop of oil now and then. The thing to check is the finish. Cheap painted sections fade in summer sun. Powder-coated sections hold their colour for years, so spend a little extra on powder coating.

Can I mix uPVC and aluminium windows in the same house?+

Yes, and many of our customers do exactly that. uPVC in road-facing bedrooms for quiet. Aluminium in the kitchen, washrooms and balcony for lower cost. The mix keeps the budget in control without giving up comfort where it matters.

More Construction & Interior Guides

Hand-picked reads from our team — practical, costed, and Greater-Noida-specific.

blog10 Costly House Construction Mistakes First-Time Owners MakeRead MoreblogBuilder Floor vs Apartment in Noida – Which Is the Better Buy?Read MoreblogTop Construction Companies in Greater Noida West (Noida Extension) 2026Read More

Planning construction or interiors in Greater Noida?

Get expert guidance, clear budgeting, and site execution support from Aarna Constructions & Interiors.

Get a QuoteCall +91 9582581238
Build with Aarna

Planning a home or interior project in Greater Noida?

📞 Call Now 💬 WhatsApp